JGVN60415User ManualENDishwasher
How to activate MultitabPress .The related indicator comes on.BEFORE FIRST USE1. Make sure that the current level ofthe water softener agrees with th
How to fill the rinse aiddispenserABDCMAX1234+-ABDCCAUTION! Only use rinse aidspecifically designed fordishwashers.1. Press the release button (D) to
2030BA DC1. Press the release button (B) to open thelid (C).2.Put the detergent, in powder or tablets,in the compartment (A).3.If the programme has a
End of the programmeWhen the programme is completed theindicator comes on. If you do notdeactivate the appliance within 5 minutes allindicators goes
• Do not put in the appliance items madeof wood, horn, aluminium, pewter andcopper.• Do not put in the appliance items thatcan absorb water (sponges,
2.Remove the filter (C) out of filter (B). 3.Remove the flat filter (A).4. Wash the filters.5. Make sure that there are no residues offood or soil in
• If you regularly use short durationprogrammes, these can leave depositsof grease and limescale inside theappliance. To prevent this, werecommend to
Problem and alarm code Possible cause and solutionThe appliance does not drain the water.• The end indicator flashes 2 times in-termittently.• Acousti
The washing and drying results are not satisfactoryProblem Possible cause and solutionPoor washing results. • Refer to "Daily use", "Hi
Problem Possible cause and solutionOdours inside the appliance. • Refer to "Internal cleaning".Limescale deposits on the ta-bleware, on the
CONTENTSSafety information 2Safety instructions 3Product description 5Control panel 5Programmes 6Settings 7Options 9Before first use 10Daily use 11Hin
100006661-A-232015
– by clients in hotels, motels, bed & breakfast and otherresidential type environments.• Do not change the specification of this appliance.• The o
• This appliance complies with the E.E.C.Directives.• Only for UK and Ireland. The appliancehas a 13 amp mains plug. If it isnecessary to change the f
PRODUCT DESCRIPTION437 9 8 105611 121Upper spray arm2Lower spray arm3Filters4Rating plate5Salt container6Air vent7Rinse aid dispenser8Deterg
IndicatorsIndicator DescriptionEnd indicator.Salt indicator. It is always off while the programme operates.Rinse aid indicator. It is always off while
Programme 1)Water(l)Energy(kWh)Duration(min)9 0.8 301) The pressure and the temperature of the water, the variations of the mains supply, the options
German de-grees (°dH)French de-grees (°fH)mmol/l Clarke de-greesWater softenerlevel37 - 42 65 - 75 6.5 - 7.5 46 - 52 829 - 36 51 - 64 5.1 - 6.4 36 - 4
How to deactivate the rinse aiddispenserThe appliance must be in programmeselection mode.1. To enter the user mode, press and holdsimultaneously and
Kommentare zu diesen Handbüchern